OpenEMS
Getting Started
ZeroTier Remote Access Guide This guide explains how to connect to the NFE Raspberry Pi from anyw...
DDSU666 (Direct chint meter ) + mbpoll Command Reference
Version: 1.0Prepared For: Field & Deployment TeamsPlatform: Raspberry Pi / LinuxTool: mbpoll ...
Running OpenEMS Edge on a Raspberry PI
This guide explains how to: Install and run OpenEMS Edge on a Raspberry Pi Configure We...
DTSU666 3‑Phase + mbpoll Command Reference
🔌 Standard Communication Settings (DTSU666) Most DTSU666 meters use: Prot...
SRNE ASP48120SH3 (Direct Hybrid Inverter) + mbpoll Command Reference
Version: 1.1 Prepared For: Field & Deployment Teams Platform: Raspberry Pi / Linux Tool: mbpoll /...
SRNE ASP48120SH3 Modbus Register Map (validated)
Validated Modbus register map for the SRNE ASP48120SH3 three-phase hybrid inverter, verified regi...
SRNE ASP48120SH3 Safe Settings Write: design, registers, and commissioning (#53)
Purpose and scope This page documents the SRNE ASP48120SH3 safe settings write feature (story #53...
SRNE charge/discharge scheduling registers (self-decoded, #67)
Summary We self-decoded the SRNE ASP48120SH3 settings registers (V1.7 protocol PDF + a live read-...
SRNE phase balancing: big consumers on one phase trip the inverter on battery
Problem When the site runs on battery (grid outage, typically evening or night), switching on a l...
OpenEMS Backend InfluxDB Data Model and Edge-ID Collision
[!warning] Verification statusThe storage-key collision vulnerability is confirmed in source cod...